Skip to main content

My Weekly Refashion Share #1 |FREE pattern & tutorial|

If you're looking for the giveaway, please click HERE

A couple of months ago I made these two onesies for my baby boy. You can read more about them by clicking each photo.

They were both refashions from t-shirts, and ever since I made them, I've been wanting to share a tutorial. But not only a tutorial, you can have a FREE pattern, the one I drafted for my own. If you are expecting a baby, or have someone close to you that is, this would make a great gift, so go ahead, grab the PATTERN, print it and let's start sewing. 

Note before you start: 
- Some pattern pieces need to be taped together. In order to do that, you have to match the number on the pattern and letters A to B. Example: piece 4A to piece 4B. Tape them matching the symbols on both pieces. 
- I didn't realise it, but I've added two star pattern pieces, but just one is enough, of course. It is an optional add. 
- All seams are 1/4" except for sleeves hem, which are 1" long. 
- Just one more thing, I've added a pattern piece for the short sleeves and one for the long sleeves option, when cutting your fabric, remember you just need one of the lenghts. 

I have used t-shirts for the entire pieces. Even for the knit bias tape (in black). If you choose to add the star appliqué, you will also need just a little bit of fusible interfacing too. You can mix different fabric colours, but try to keep them from soft knit, it is a piece you're making for the delicate skin of a new baby. You will also need snaps. 

Start by cutting your pieces (make sure to have the right sides facing up). Information on how many to cut on each piece is on pattern and on the picture above. Besides the pattern pieces, you will need to use two tiny bits of scraps, cut them about 1"x2", fold it lenght wise and use a zig zag stitch all around the edges. You'll have two little squares you'll want to save for later. 

- Start by hemming both sleeves. Finish hem edges, then fold 1" towards the inside, press and stitch. This step is not pictured because I used the original hems from the t-shirts. If you're doing the same, remember to cut 1" off of the pattern piece. 
- With right sides together (RST) pin shoulders. Finish your seams (with a zigzag stitch/overlock), and press towards the back piece. 
- Place onesie with right side facing up, put sleeve RST and pin the sleeve all around (in case you have any doubts, check the colour/fabric of right and left sleeve in my onesie to check if you're doing it right). 
- Sew it and finish your seams. Press towards the sleeve. Do not repeat for the other sleeve (left side) yet. 

- Use one of those little scrap squares to add to the side seam in the right side of the onesie (first red arrow). When you sew the sides together it should be attached to the front side piece, and will stay in the interior of the onesie when you're done (as seen on the fouth photo below). 
- The second arrow on the first photo shows were the other little square will be added, but we'll get there a little later. 
- Put RST of the side and pin it from sleeve to bottom. Sew and finish your seams. 

- Make sure you have enough bias tape (I used about 44", but I guess it might change a little according to the stretch in your fabrics so the best thing to do is to measure all around your piece to know how much you will need, or just go, with the same measurement I've used and add an extra inch or two to be sure it will be enough. 
- Start pinning the bias tape right side of bias, facing wrong side of onesie, at the bottom of the front left side seam and go all around until you reach the bottom of the back left side (I hope it is clear in the first photo below). 
- Press seams down, turn about 1/4" and then the same again. 
- Pin and sew (on the right side) with a double needle or a zigzag stich. Don't pull your fabric while stitching, allow your machine to feed it and just guide it carefully. 

- This is how it will look when you're done with this step:

- You can add the other sleeve now, following the same steps you did to attach the first one, and can be seen on the photos below. 
- Close the left side seam. Put RST, and remember to add the second square to the seam. Pin, sew and finish seams. 

- Your onesie is almost finished. The last step consists in adding snaps. Check on pattern the places you should add them, they are marked with a circle, but you also have this photo here to help you:

And just a little more help, here's how snaps should be added:

- I had just one extra step in my onesie. A problem that turned into garment design, I'd say. When I finished the whole thing, I realised it had two holes in the buttom of the back piece, as arrows below point to. To cover the mess, I've cut a piece from the black t-shirt scraps, used fusible interfacing to make it stiffer, used the star shapped pattern to cut an applique, pinned and stitched it on top of the holes. You can also do it to add style to your onesie, or not. Also you can apllique it in any other place of the onesie if you'd like. 

Now put it on your new baby and enjoy your newest creation. 


  1. I love this! I added to my monthly feature!

  2. brilliant!! so much easier than sticking baby's head through neck holes!! thank you soooo much

  3. Magda, this is wonderful! I'm featuring this pattern as my newsletter's free pattern of the week. Thanks for sharing! :) Lisa

  4. I have a very basic, possibly silly question: how do I determine the actual measurements of the onesie? And how would I relate that to your pattern? I appreciate any help :)

    1. Hey Brandi, I am so sorry I am so late answering this. I made this pattern for a new born baby measuring about 50 cm height (about 19.5"). I hope that helps.


Post a Comment

Leave a comment, I'd love to read it.
Leave your URL too, so I can visit you.

Popular posts from this blog

Pocket Sling Tutorial

Back in September, I guest posted for Tasha over I Seam Stressed, while she was adjusting to her new life as mom of two. For that post, I've put up a tutorial on how to do your own pocket sling. Today's, I am bringing it home, since all we think about now is Christmas and all the handmade presents we have to make, i think this should be a good idea to gift a new mom or a pregnant relative/friend in your life. Enjoy!

Since my appearence here is due to Tasha's baby boy's birth, I thought I'd come up with something every mom should have. Especially when they are still newborns (even though I used mine until my little one was around one year old, then she just wanted to walk everywhere and we slowly left it aside). I am talking about a baby pocket sling, of course.

I prefer pocket slings over ring slings by far, it gives me a better sense of security, but that might be just me. And today I will share a tutorial on how to do your own.

So, the first thing you have to do is…

The Dreaming of Spring Blazer |FREE PDF Pattern| day 1 of the Sew along

EDITED: You have until the 30th of November to link your blazer to the flickr group to have a chance to win a free pattern for the Bubble Shorts pattern by DoGuincho. Read more about it here.

If you are new to my blog, you might not know that I have promised to share a pattern for the blazer I made my daughter when I competed in the Sew Off. If you were following already back then, well, I am sorry I kept you waiting for so long. If you haven't yet, you might want to check out the blazers my friend testers made. You'll love them, I'm so sure!

It was about time to give something back, since I've been getting so much from this wonderful sewing community, and keep up with my word. After all, I've always heard it's better late than never, right? And it's FREE so: please don't complain.

This pattern will fit a 18 months to 2 year old, but I believe it has space to grow - especially on the sleeves department. I guess it really depends on your child. Mine was…